|
|
Universal monitoring and diagnostic probe for serial communication
Dvořák, Ondřej ; Povalač, Aleš (referee) ; Záplata, Filip (advisor)
The thesis deals with design of a device for communication analysis in standardized serial interfaces, with differing parameters. The goal of the thesis is a complete design of a device including wiring diagrams, PCB, get PCB alive and design complete device firmware. The device will be able to process and analyze data on selected interfaces. The user controls the device with the use of USB interface, connecting the device with a PC or other computing devices. Communication is done by a simple protocol in ASCII, its design is included in this thesis. The device can analyze errors in the interface and inform the user about them. Firmware should be flexible, to allow the addition of more interfaces and protocols.
|
|
|
Probabilistic Localization of Mobile Robot
Kopečný, Tomáš ; Luža, Radim (referee) ; Rozman, Jaroslav (advisor)
Motion control, navigation and sense of orientation of a mobile robot are tied to development of every mobile robot. This work concerns mainly about robot localization in the sense of orientation in space. Nevertheless, nor other aspects of mobile robotics are being omitted. Therefore, the goal of this work is to get familiar with Monte Carlo localization algorithm and apply this algorithm on a real robot.
|
|
|
Processing of the RC plane model telemetry
Žák, Tomáš ; Fedra, Zbyněk (referee) ; Prokopec, Jan (advisor)
Bachelor’s project focuses on problematic about scanning state of RC plane model, during the fly. In detail there is described internal and external structure, including communication. Main objective of work is design functional board for scanning state of RC plane model, during the fly. There is used akcelerometer for scanning actual state of plane. Accelerometer sends measured data in digital form to microcontroller for evaluating. List of used components is in the enclosure.
|
|
|
Secure PC Connection
Winter, Jan ; Škarvada, Jaroslav (referee) ; Kubek, Ján (advisor)
Aim of this master's thesis is the creation of serial communication interface for FITkit. This serial interface is a full duplex industrial bus based on 20mA loop circuit and it should allow connection of two FITkits by RS-485. Aim of this paper is to design simple software allowing communication of two FITkits and to secure this communication on RS-485 link against interference or transfer errors.
|
|
|
RS-232 Serial Data Transmitter
Paul, Martin ; Kubíček, Michal (referee) ; Kolouch, Jaromír (advisor)
The aim of my bachelor thesis is to create an RS-232 transmitter in the Xilinx ISE WebPACK development system with the possibility to set the details of transmitted data by input signals. It is necessary to explore demands of the designed transmitter in terms of consumption of the structural components in the PLD network. The function test of the project was done by the help of development kit.
|
|
|
Applications of Mobile Device in Ultramicro Aircraft/Helicopter
Žůrek, Daniel ; Mlích, Jozef (referee) ; Zemčík, Pavel (advisor)
This thesis deals with the development of embedded measuring device for ultralight aircraft/ helicopters and implementation of application for mobile phone. The aim is to create a system that can determine the duration of the flight. The paper describes the speed sensing methods, wireless communication, hardware implementation of the measuring device and creation of the necessary software to view data.
|
|
|
Localization system making use of GPS and GSM
Klozar, Lukáš ; Pust, Radim (referee) ; Šebela, Radek (advisor)
Aim of this master´s project is to analyse localization possibilities in GSM and GPS wireless networks. Choise of proper module and design location device for both GPS and GSM networks. Design and construction of system, which is able to designate it´s positron, using both GPS and GSM networks. The location informations, are send to Internet server, using GPRS system. Localization techniques in both wireless network are described. The system which is able to get position information was designed and constructed. The module´s driving software and the software, which process the localization informations and controls the database storing process, was designed.
|
|
|
The heartbeat counter
Malínský, Zdeněk ; Dlouhý, Jiří (referee) ; Švrček, Martin (advisor)
Heart rate variability belongs to basic and most frequently interpretation of physiologic statement in medicine. The pulse rate serves as an indicator of the heart activity. The subject of this diploma thesis is projection of the heartbeat counter. The work describes electrocardiograph and separated waves, ways of calculation heart rate, characteristics mechanism for measuring and other necessary information about heart rate measuring. This master thesis fixates on heart rate-calculation from including R-R intervals. Here is described whole project of heartbeat counter, properties of separated blocks and calculation of useful parameters. Further there is noted software resolution for the microcontroller and program for the calculation of heart rate frequency including unwinding signal preprocessing and detection of separated QRS complexes. The products of this diploma thesis are the circuit including the board circuit and codes of separated programs.
|
|
|
Universal monitoring and diagnostic probe for serial communication
Dvořák, Ondřej ; Povalač, Aleš (referee) ; Záplata, Filip (advisor)
The thesis deals with design of a device for communication analysis in standardized serial interfaces, with differing parameters. The goal of the thesis is a complete design of a device including wiring diagrams, PCB, get PCB alive and design complete device firmware. The device will be able to process and analyze data on selected interfaces. The user controls the device with the use of USB interface, connecting the device with a PC or other computing devices. Communication is done by a simple protocol in ASCII, its design is included in this thesis. The device can analyze errors in the interface and inform the user about them. Firmware should be flexible, to allow the addition of more interfaces and protocols.
|
|
|
Processing of the RC plane model telemetry
Žák, Tomáš ; Fedra, Zbyněk (referee) ; Prokopec, Jan (advisor)
Bachelor’s project focuses on problematic about scanning state of RC plane model, during the fly. In detail there is described internal and external structure, including communication. Main objective of work is design functional board for scanning state of RC plane model, during the fly. There is used akcelerometer for scanning actual state of plane. Accelerometer sends measured data in digital form to microcontroller for evaluating. List of used components is in the enclosure.
|
guest ::
